Shanghai Bao Steel Co., Ltd. specializes in the production margin Incoloy800HT, N08811 manufacturers, Incoloy800HT seamless, Incoloy800HT round, Incoloy800HT plate, Incoloy800HT wire, Incoloy800HT pipe fittings, Incoloy800HT forgings, Incoloy800HT flange, Incoloy800HT wire, Incoloy800HT accessories. Chemical composition% of nickel alloy Incoloy 800HT carbon ferrochrome aluminum titanium silicon manganese copper sulfur 800HT minimum 3019 0.05 3523 0.15 0.15 maximum margin 0.10 1.5 1 0.75 0.015 0.60 0.60 Incoloy 800HT physical properties of density 8.0 g / cm3 Melting Point 1350-1400 ℃ Incoloy 800HT alloy at room temperature, the minimum tensile strength of the mechanical properties of the alloy Rm N / mm2 yield strength RP0.2N / mm2 Elongation A5% 800H T 450 180 35 800HT alloy has the following characteristics: 1 up to 500 ℃ of metallurgical structure workability Incoloy 800HT 800HT very high temperature aqueous medium has 3 good excellent corrosion resistance 2 good resistance to stress corrosion performance for a face-centered cubic lattice structure. Very low carbon content and improving the Ti: C ratio increases the stability and structure of the largest anti-allergy activity and resistance to intergranular corrosion. Low temperature annealing 950 ℃ or so to ensure that the fine grain structure. Incoloy 800HT corrosion resistant to many corrosive media 800H corrosion. Its high nickel content in aqueous corrosion conditions has good resistance to stress corrosion cracking. High chromium content so that it has better resistance to pitting and crevice corrosion cracking. The alloy has good resistance to nitric acid, organic acid corrosion, but limited corrosion resistance * and hydrochloric acid. In addition to halide pitting corrosion may occur, with good corrosion resistance in oxidizing and non-oxidizing salt. In water, steam and mixtures of steam, air, carbon dioxide also has good corrosion resistance. Incoloy 800HT Application field there: 800HT 1. nitrate condenser - nitric acid corrosion 2 steam heating pipes - good mechanical properties 3 heating element tube - very good mechanical properties for applications up to 500 ℃ of environment state is annealed alloy supplier. Incoloy800HT corrosion resistant to many corrosive media. Its high nickel content in aqueous corrosion conditions has good resistance to stress corrosion cracking. High chromium content so that it has better resistance to pitting and crevice corrosion cracking. The alloy has good resistance to nitric acid, organic acid is corrosive. Po-edge company mainly production and supply of high-temperature alloy grades are: (GH2132, GH3030, GH3039, GH3128, GH4145, GH4169, GH4180) Inconel alloys: (Inconel600, Inco601, Inconel625, Inconel690, Inconel718, Inconel617, Inconel725) Inconel Loy alloys: (Incoloy800, Incoloy800H, Incoloy800HT, Incoloy825, Incoloy925, Incoloy926, Incoloy DS) Hastelloy: (Hastelloy C-276, Hastelloy C, Hastelloy X, Hastelloy B, Hastelloy B-2) Monel: (Monel400 , MonelK500, Monel450) corrosion resistant alloys: (NS111, NS112, NS142, NS312, NS313, NS321, NS333, NS334, NS335, NS336) precision alloy: (Cr20Ni80,1J50,1J79,3J53,4J29,4J36) special stainless :( 904L, A4 steel, U3 steel, Invar36, Alloy20Cb-3, Al-6XN, 253MA, XM-19,310Si, 316LMod, 2205,2507, S31254,15-5PH, 15-7PH, 17-7PH, 17-4PH) especially large thick pipe for advantage.